Failure modes effects criticality analysis.

Source: API Technical Report 17TR7, Verification and Validation of Subsea Connectors, First Edition, April 2017. Global Standards


Failure mode, effects and criticality analysis.

Source: ISO 17776:2016, Petroleum and natural gas industries — Offshore production installations — Major accident hazard management during the design of new installations, Second Edition, December 2016. Global Standards

Source: API Standard 2RD, Dynamic Risers for Floating Production Systems, Second Edition, September 2013. Global Standards

Source: API RP 17G, Recommended Practice for Completion/Workover Risers, Second Edition, July 2006 (Reaffirmed April 2011). Global Standards

Source: ISO 20815:2008, Petroleum, petrochemical and natural gas industries – Production assurance and reliability management. Global Standards

Source: Oil & Gas UK, Guidelines on subsea BOP systems, Issue 1, July 2012, Global Standards



analysis usually performed after an FMEA (3.21) which can be based on the probability that the failure mode will result in system failure, or the level of risk associated with the failure mode, or a risk’s priority

Source: ISO 16530-1:2017, Petroleum and natural gas industries — Well integrity – Part 1: Life cycle governance, First Edition, March 2017. Global Standards



Failure mode effect and consequence analysis.

Source: Rules for Classification – Offshore units, DNVGL-OU-0101, Offshore drilling and support units, DNV GL, July 2015. Global Standards


Failure mode, effect and criticality analysis.

Source: API RP 17H, Remotely Operated Vehicle (ROV) Interfaces on Subsea Production Systems, First Edition, July 2004 (Reaffirmed January 2009). Global Standards

Source: API STD 689, Collection and Exchange of Reliability and Maintenance Data for Equipment, First Edition, July 2007. Global Standards

Source: International Association of Drilling Contractors, Appendix 2 to Health, Safety and Environment Case Guidelines for Offshore Drilling Contractors, Issue 3.3.2, February 2010. IADC Guidelines

Source: NOPSEMA Guidance note: Hazard Identification, N-04300-GN0107, Australia, Revision 5, December 2012. Regulatory Guidance

Comments are closed.