Busway

Busway

Definition(s)


Busway

A grounded metal enclosure containing bare or insulated conductors that usually are copper or aluminum bars, rods or tubes, see NEC Article 368. Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards
Bus

Bus

Definition(s)


Bus, cable

An approved assembly of insulated conductors with fittings and conductor terminations in a totally enclosed protective metal housing, see NEC Article 370. Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards
AWG

AWG

Definition(s)


AWG

American Wire Gauge. Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards
Atmosphere

Atmosphere

Definition(s)


Atmosphere, explosive

A mixture with air, under atmospheric conditions, of flammable substances in the form of gas, vapor, mist, or dust in which, after ignition, combustion spreads throughout the unconsumed mixture. Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards
Area, Safe

Area, Safe

Definition(s)


Area, safe

See location, nonhazardous (unclassified). Source: API Recommended Practice 14FZ, Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1, and Zone 2 Locations, Second Edition, May 2013. Global Standards Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards
ASHRAE

ASHRAE

Definition(s)


ASHRAE

American Society of Heating, Refrigerating, and Air Conditioning Engineers. API RP 500, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2, Third Edition, December 2012, Global Standards Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards
Apparatus

Apparatus

Definition(s)


Apparatus, intrinsically safe

Apparatus in which all the circuits are intrinsically safe. Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards  

Associated apparatus

Apparatus used in intrinsically safe systems in which the circuits are not necessarily intrinsically safe themselves but affect the energy in the intrinsically safe circuits and are relied on to maintain intrinsic safety, see NEC Article 504-4 for additional details. Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards  

Simple apparatus (as applied to intrinsic safety)

A device that will not generate or store more than 1.2 V, 0.1 A, 25 mW, or 20 microJ. Examples are switches, thermocouples, light-emitting diodes, connectors, and resistance temperature detectors (RTDs). Apparatus reliant on voltage or current limiting or suppression devices for remaining within the limits given in the definition, and sensors (e.g. certain gas detector sensors) that utilize catalytic reaction or other electrochemical mechanisms are excluded by IEC 60079-11 from the category of "simple apparatus". Temperature limitations as described in 4.2 are applicable to simple apparatus. Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards
Aluminum

Aluminum

Definition(s)


Aluminum, copper-free (or low copper content)

Aluminum alloys containing 0.4 % or less copper. Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards
AHJ

AHJ

Definition(s)


AHJ

Authority Having Jurisdiction. Source: API RP 98, Personal Protective Equipment Selection for Oil Spill Responders, First Edition, August 2013. Global Standards Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards
AEx

AEx

Definition(s)


AEx

Required marking prefix for electrical apparatus to be installed in hazardous (classified) locations meeting one or more types of protection in accordance with harmonized American National (ANSI) Standards as defined in Article 505 of the NEC.

Source: API Recommended Practice 14FZ, Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1, and Zone 2 Locations, Second Edition, May 2013. Global Standards

AEx

Required marking prefix for apparatus meeting one or more types of protection in Section 505-4 for installation in accordance with Article 505 of the National Electrical Code, NFPA 70:2008. Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards
AFC

AFC

Definition(s)


Adjustable frequency controller or AFC

A device that is used to control the speed of an AC motor by varying the frequency of the voltage supplied to it. These are also known as adjustable speed drives, variable frequency drives, adjustable frequency drives and other, similar, names. Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards
Adjustable Frequency Controller

Adjustable Frequency Controller

Definition(s)


Adjustable frequency controller or AFC

A device that is used to control the speed of an AC motor by varying the frequency of the voltage supplied to it. These are also known as adjustable speed drives, variable frequency drives, adjustable frequency drives and other, similar, names. Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards
Accessible

Accessible

Definition(s)


Accessible (as applied to equipment)

Admitting close approach: not guarded by locked doors, elevation, or other effective means. (See accessible, readily.) Source: API Recommended Practice 14FZ, Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1, and Zone 2 Locations, Second Edition, May 2013. Global Standards Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards  

Accessible (as applied to wiring methods)

Capable of being removed or exposed without damaging the building structure or finish, or not permanently closed in by the structure or finish of the building. Source: API Recommended Practice 14FZ, Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1, and Zone 2 Locations, Second Edition, May 2013. Global Standards Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards  

Accessible, readily

Capable of being reached quickly for operation, renewal, or inspections, without requiring those to whom ready access is requisite to climb over or remove obstacles or to resort to portable ladders, etc. [See accessible (as applied to equipment).] Source: API Recommended Practice 14FZ, Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1, and Zone 2 Locations, Second Edition, May 2013. Global Standards Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards
ABS

ABS

Definition(s)


ABS

American Bureau of Shipping. Source: Rules for Classification and Construction, IV Industrial Services, 6 Offshore Technology, 9 Guideline for Personnel Transfers by Means of Lifting Appliances, Edition 2011, Germanischer Lloyd SE, Global Standards Source: International Association of Drilling Contractors, Appendix 2 to Health, Safety and Environment Case Guidelines for Offshore Drilling Contractors, Issue 3.3.2, February 2010. IADC Guidelines API RP 500, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2, Third Edition, December 2012, Global Standards Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards
Watertight

Watertight

Definition(s)


Watertight

Watertight means designed and constructed to withstand a static head of water without any leakage, except that watertight equipment means enclosed equipment so constructed that a stream of water from a hose (not less than 1 inch in diameter) under head of about 35 feet from a distance of about 10 feet, and for a period of 5 minutes, can be played on the apparatus without leakage. Source: Mobile Offshore Drilling Units, 46 CFR 107-109 (2013). Regulations  

Water-tight

Equipment so enclosed that it meets at least a NEMA 250 Type 4 or 4X or an IEC IP 55 or 56 rating. Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards  

Watertight

Watertight means the capability of preventing the passage of water through the structure in any direction under a head of water for which the surrounding structure is designed. Source: IMO Resolution A.1023(26), Code for the Construction and Equipment of Mobile Offshore Drilling Units (2009 MODU Code), 2009. Global Standards  

Watertight

“Watertight” means designed and constructed to withstand a static head of water without any leakage (étanche à l’eau). Source: Canada Oil and Gas Installations Regulations, SOR/96-111, Canada, current to May 1, 2014. Regulations Source: Canada Oil and Gas Installations Regulations, SOR/96-118, February 2013. Regulations Source: Nova Scotia Offshore Petroleum Installations Regulations, SOR/95-191, Canada, current to May 31, 2012. Regulations  

Watertight

Watertight. Watertight means capable of preventing the passage of water through the structure in either direction with a proper margin of resistance under the pressure due to the maximum head of water which it might have to sustain.  <Chapter I, regulation 3>. Source: IMO Resolution MSC.143(77), amendments to Annex B to the 1988 Load Lines Protocol, 5 June 2003, International Maritime Organization. Legislation  

Watertight

Watertight means having scantlings and arrangements capable of preventing the passage of water in any direction under the head of water likely to occur in intact and damaged conditions. In the damaged condition, the head of water is to be considered in the worst situation at equilibrium, including intermediate stages of flooding. . <Chapter II-1, regulation 2>. Source: IMO Resolution MSC.216(82), amendments to the International Convention for the Safety of Life at Sea, 1974, as amended, 8 December 2006, International Maritime Organization. Legislation  

Watertight

A closing appliance is considered watertight if it is designed to prevent the passage of water in either direction under a head of water for which the surrounding structure is designed. Source: Rules and Regulations for the Classification of Mobile Offshore Units, Part 4, Steel Unit Structures, June 2013, Lloyd’s Register, Global Standards  
Surface Unit

Surface Unit

Definition(s)


Surface Unit

Surface unit is a unit with a ship- or barge-type displacement hull of single or multiple hull construction intended for operation in the floating condition. Source: IMO Resolution A.1023(26), Code for the Construction and Equipment of Mobile Offshore Drilling Units (2009 MODU Code), 2009. Global Standards Source: IMO resolution MSC.267(85), International Code on Intact Stability, 2008 (2008 IS Code), 4 December 2008, International Maritime Organization. Regulatory Guidance Source: IMO Resolution MSC.267(85), adoption of the International Code on Intact Stability, 2008 (2008 IS Code), 4 December 2008, International Maritime Organization. Regulatory Guidance   Surface Type Unit Surface type unit means a unit with a ship shape or barge type displacement hull of single or multiple hull construction intended for operation in the floating condition. Source: Mobile Offshore Drilling Units, 46 CFR 107-109 (2013). Regulations
Standard Fire Test

Standard Fire Test

Definition(s)


Standard Fire Test

Standard Fire Test means the test in which specimens of the relevant bulkheads or decks, having a surface of approximately 4.65 square meters (50 square feet) and a height of 2.44 meters (8 feet) resembling as closely as possible the intended construction and including, where appropriate, at least one joint, are exposed in a test furnace to a series of temperature relationships approximately as follows: (1) At the end of 5 minutes, 538 °C. (1,000 °F.) (2) At the end of 10 minutes, 704 °C. (1,300 °F.) (3) At the end of 30 minutes, 843 °C. (1,550 °F.) (4) At the end of 60 minutes, 927 °C. (1,700 °F.). Source: Mobile Offshore Drilling Units, 46 CFR 107-109 (2013). Regulations  

Standard Fire Test

Standard fire test means a test in which specimens are exposed in a test furnace to temperatures corresponding approximately to the standard time-temperature curve. Source: IMO Resolution MSC.307(88), International Code for Application of Fire Test Procedures, 2010 (2010 FTP Code), 3 December 2010, International Maritime Organization. Regulatory Guidance  

Standard Fire Test

A standard fire test is one in which the specimens of the relevant bulkheads and decks are exposed in a test furnace to temperatures corresponding approximately to the standard time-temperature curve. The test methods shall be in accordance with the Fire Test Procedures Code. <Chapter II-2, Part A, regulation 3>. Source: IMO Resolution MSC.57(67), adoption of amendments to the International Convention for the Safety of Life at Sea (SOLAS), 1974, 5 December 1996, International Maritime Organization. Legislation  

Standard Fire Test

“Standard fire test” means a test conducted in accordance with Regulation 3.2 of Chapter II-2 of International Maritime Organization International Conference on Safety of Life at Sea; essai standard de résistance au feu. Source: Canada Oil and Gas Installations Regulations, SOR/96-111, Canada, current to May 1, 2014. Regulations Source: Nova Scotia Offshore Petroleum Installations Regulations, SOR/95-191, Canada, current to May 31, 2012. Regulations  

Standard Fire Test

A standard fire test is a test in which specimens of the relevant bulkheads or decks are exposed in a test furnace to temperatures corresponding approximately to the standard time-temperature curve in accordance with the test method specified in the Fire Test Procedures Code. The specimen is to have an exposed surface of not less than 4,65 m2 and height (or length of deck) of 2,44 m resembling as closely as possible the intended construction and including where appropriate at least one joint. The standard time-temperature curve is defined by a smooth curve drawn through the following temperature points measured above the initial furnace temperature: At the end of the first 5 minutes - 576°C At the end of the first 10 minutes - 679°C At the end of the first 15 minutes - 738°C At the end of the first 30 minutes - 841°C At the end of the first 60 minutes - 945°C. Source: Rules and Regulations for the Classification of Mobile Offshore Units, Part 7, Safety Systems, Hazardous Areas and Fire, June 2013, Lloyd’s Register, Global Standards
Semi-enclosed Location

Semi-enclosed Location

Definition(s)


Semi-enclosed location

For the purpose of this subpart “semi-enclosed location” means a location where natural conditions of ventilation are notably different from those on open decks due to the presence of structures such as roofs, windbreaks, or bulkheads. Source: Mobile Offshore Drilling Units, 46 CFR 107-109 (2013). Regulations  

Semi-enclosed locations

Semi-enclosed locations are locations where natural conditions of ventilation are notably different from those on open decks due to the presence of structures such as roofs, windbreaks and bulkheads and which are so arranged that dispersion of gas may not occur. Source: IMO Resolution A.1023(26), Code for the Construction and Equipment of Mobile Offshore Drilling Units (2009 MODU Code), 2009. Global Standards  

Semi-enclosed

Semi-enclosed locations are locations where natural conditions of ventilation are notably different from those on open decks due to the presence of structures such as roofs, windbreaks and bulkheads and which are so arranged that the dispersion of gas may not occur. Source: IEC 61892-7, Mobile and fixed offshore units – Electrical installations – Part 7: Hazardous areas. Global Standards  
Self-Elevating Unit

Self-Elevating Unit

Definition(s)


Self-Elevating Unit

Self-elevating unit is a unit with movable legs capable of raising its hull above the surface of the sea and lowering it back into the sea. Source: IMO Resolution A.1023(26), Code for the Construction and Equipment of Mobile Offshore Drilling Units (2009 MODU Code), 2009. Global Standards Source: IMO resolution MSC.267(85), International Code on Intact Stability, 2008 (2008 IS Code), 4 December 2008, International Maritime Organization. Regulatory Guidance  

Self-Elevating Unit

Self-elevating unit means a unit with moveable legs capable of raising its hull above the surface of the sea. Source: Mobile Offshore Drilling Units, 46 CFR 107-109 (2013). Regulations  

Self-Elevating Unit

Self-elevating unit is a unit with moveable legs capable of raising its hull above the surface of the sea. Source: IMO Resolution MSC.267(85), adoption of the International Code on Intact Stability, 2008 (2008 IS Code), 4 December 2008, International Maritime Organization. Regulatory Guidance  

Self-Elevating Unit

Self-elevating units are mobile units which are designed to operate as sea bed-stabilised units in an elevated mode. These units have a buoyant hull with movable legs capable of raising the hull above the surface of the sea. The legs may be designed to penetrate the sea bed, or be attached to a mat or individual footings which rest on the sea bed. Source: Rules and Regulations for the Classification of Mobile Offshore Units, Part 1, Regulations, June 2013, Lloyd’s Register, Global Standards
Lifejacket

Lifejacket

Definition(s)


Lifejacket

Lifejacket means a flotation device approved as a life preserver or lifejacket.1  

Life-jacket

Device worn by personnel which has sufficient buoyancy and stability in water to turn the body of an unconscious person and keep the person’s mouth clear of the water.2  

Source(s)


1. Mobile Offshore Drilling Units, 46 CFR 107-109 (2013). Regulations 2. ISO 15544:2000, Petroleum and natural gas industries – Offshore production installations – Requirements and guidelines for emergency. Global Standards
Embarkation Station

Embarkation Station

Definition(s)


Embarkation station

A location from which persons embark into survival craft or are assembled prior to embarking into survival craft. Source: API Recommended Practice 14FZ, Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1, and Zone 2 Locations, Second Edition, May 2013. Global Standards Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards

Embarkation station

Embarkation station means the place where a survival craft is boarded. Source: Mobile Offshore Drilling Units, 46 CFR 107-109 (2013). Regulations  
Drillship

Drillship

Definition(s)


Drillship

a drilling installation with a ship-shaped single- or multiple-hull arrangementl. Source: Atlantic Canada Offshore Petroleum Industry, Standard Practice for the Training and Qualifications of Personnel, 2013, Canadian Association of Petroleum Producers, Global Standards

Drillship

Drillship means a surface type unit with a single shipshape displacement hull. Source. Mobile Offshore Drilling Units, 46 CFR 107-109 (2013). Regulations
Column Stabilized Unit

Column Stabilized Unit

Definition(s)


Column-Stabilized Unit

Column-stabilized unit is a unit with the main deck connected to the underwater hull or footings by columns or caissons. Source: IMO Resolution A.1023(26), Code for the Construction and Equipment of Mobile Offshore Drilling Units (2009 MODU Code), 2009. Global Standards Source: IMO resolution MSC.267(85), International Code on Intact Stability, 2008 (2008 IS Code), 4 December 2008, International Maritime Organization. Regulatory Guidance Source: Mobile Offshore Drilling Units, 46 CFR 107-109 (2013). Regulations Source: IMO Resolution MSC.267(85), adoption of the International Code on Intact Stability, 2008 (2008 IS Code), 4 December 2008, International Maritime Organization. Regulatory Guidance
Classified Locations

Classified Locations

Definition(s)


Classified Locations

A classified location is a location classified as Division 1 or Division 2, or Zone 0, Zone 1, or Zone 2. Source: API Recommended Practice 14FZ, Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1, and Zone 2 Locations, Second Edition, May 2013. Global Standards Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards  

Class I location

A Class I location is one in which flammable gases or vapors are or may be present in the air in quantities sufficient to produce explosive or ignitable mixtures. (See NEC Article 500 and NEC Article 505 and API 500 and API 505.) Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards  

Class I, Division 1 location A

Class I, Division 1 location is a location: 1) in which ignitable concentrations of flammable gases or vapors exist continuously, intermittently, or periodically under normal operating conditions; or 2) in which ignitable concentration of such gases or vapors may exist frequently because of repair or maintenance operations or because of leakage; or 3) in which breakdown or faulty operation of equipment or processes might release ignitable concentrations of flammable gases or vapors, and might also cause simultaneous failure of electrical equipment (see NEC Article 500 and API 500). Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards  

Class I, Division 2 location

A Class I, Division 2 location is a location: 1) in which volatile flammable liquids or flammable gases are handled, processed, or used, but in which the hazardous liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only if accidental rupture or breakdown of such containers or systems or abnormal operation of equipment occurs; or 2) in which hazardous concentrations of gases or vapors are normally prevented by positive mechanical ventilation but that might become hazardous through failure or abnormal operation of the ventilating equipment; or 3) that is adjacent to a Class I, Division 1 location, and to which hazardous concentration of gases or vapors might occasionally be communicated unless such communication is prevented by adequate positive-pressure ventilation from a source of clean air, and effective safeguards against ventilation failure are provided. (See NEC Article 500 and API 500.) Source: API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fifth Edition, July 2008. Global Standards  

Classified locations

Classified locations are those in which flammable hydrocarbon gas or vapors, resulting from the drilling operations, may be present in quantities sufficient to produce an explosive or ignitable mixture. Location of these areas affect the design of the units' machinery, electrical, and ventilation systems. (See Notes 1 and 2). Notes:
  1. Further requirements with respect to hazardous locations are contained in part 111, subpart 111.105, of this chapter.
  2. For specific requirements for machinery and electrical installations on mobile offshore drilling units see Subchapters “F” and “J” of this chapter.
Source: Mobile Offshore Drilling Units, 46 CFR 107-109 (2013). Regulations    
Anniversary Date

Anniversary Date

Definition(s)

Anniversary date

Anniversary date means the day and the month of each year, which corresponds to the date of expiration of the Certificate of Inspection. Source: Mobile Offshore Drilling Units, 46 CFR 107-109 (2013). Regulations  

Anniversary date

Anniversary date means the day and month of each year which will correspond to the date of expiry of the certificate. Source: IMO Resolution A.1023(26), Code for the Construction and Equipment of Mobile Offshore Drilling Units (2009 MODU Code), 2009. Global Standards Source: International Convention for the Control and Management of Ships’ Ballast Water and Sediments, 2004, Legislation

Anniversary date

Anniversary date means the day and the month of each year which will correspond to the date of expiry of the International Pollution Prevention Certificate for the Carriage of Noxious Liquid Substances in Bulk.  <Annex II, Chapter 1, Regulation 1>. Source: Source: Resolution MEPC.118(52), amendments to the Annex of the Protocol of 1978 relating to the International Convention for the Prevention of Pollution from Ships, 1973 (Revised Annex II of MARPOL 73/78), 15 October 2004, International Maritime Organization. Legislation  

Anniversary date

Anniversary date means the day and the month of each year which will correspond to the date of expiry of the International Air Pollution Prevention Certificate. <Annex VI, regulation 2>. Source: Source: Resolution MEPC.118(52), amendments to the Annex of the Protocol of 1978 relating to the International Convention for the Prevention of Pollution from Ships, 1973 (Revised Annex II of MARPOL 73/78), 15 October 2004, International Maritime Organization. Legislation Source: Resolution MEPC.176(58), amendments to the Annex of the Protocol of 1978 relating to the International Convention for the Prevention of Pollution from Ships (Revised MARPOL Annex VI), 10 October 2008, International Maritime Organization. Legislation  

Anniversary Date

Anniversary date means the day and month of each year that corresponds to the date of expiry of the relevant document or certificate. Source: IMO Resolution MSC.104(73), amendments to the International Management Code for the Safe Operation of Ships and for Pollution Prevention (International Safety Management (ISM) Code), 5 December 2000, International Maritime Organization. Legislation
Accommodation Space

Accommodation Space

Definition(s)


Accommodation space

Accommodation space includes, sleeping, mess, hospital, recreational, toilet, washing and shower spaces, and corridors. Source: Mobile Offshore Drilling Units, 46 CFR 107-109 (2013). Regulations  

Accommodation space

Accommodation spaces are those used for public spaces, corridors, lavatories, cabins, offices, hospitals, cinemas, games and hobbies rooms, pantries containing no cooking appliances and similar spaces. ‘Public spaces’ are those portions of the accommodation which are used for halls, dining rooms, lounges and similar permanently enclosed spaces. Source: Rules and Regulations for the Classification of Mobile Offshore Units, Part 7, Safety Systems, Hazardous Areas and Fire, June 2013, Lloyd’s Register, Global Standards
Accommodation

Accommodation

Definition(s)


Accommodation

Place where personnel onboard sleep and spend their off-duty time.
  • Note: 1 to entry: It can include dining rooms, recreation rooms, lavatories, cabins, offices, sickbay, living quarters, galley, pantries, and similar permanently enclosed spaces.
Source: ISO 13702:2015, Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines, Second Edition, August 2015. Global Standards

Accommodation

Accommodation means a cabin or other covered or enclosed place intended to carry persons. Source: Mobile Offshore Drilling Units, 46 CFR 107-109 (2013). Regulations  

Accommodation

Place where personnel onboard sleep and spend their off-duty time. NOTE It may include dining rooms, recreation rooms, lavatories, cabins, offices, sickbay, living quarters, galley, pantries and similar permanently enclosed spaces. Source: ISO 15544:2000, Petroleum and natural gas industries – Offshore production installations – Requirements and guidelines for emergency. Global Standards

Vessel

Vessel

Definition(s)


Vessel

A common term for ships, craft, offshore units and offshore installations. Source: Offshore Gangways, DNVGL-ST-0358, DNV GL, September 2017. Global Standards

Vessel

In the context of these rules mean a mobile offshore unit (MOU). Source: Rules for Classification – Offshore units, DNVGL-OU-0101, Offshore drilling and support units, DNV GL, July 2015. Global Standards

Vessel

Container or structural envelope in which materials are processed, treated, or stored [e.g. pressure vessels, reactor vessels, and storage vessels (tanks)]. Source: API STD 521, Pressure-relieving and Depressuring Systems, Sixth Edition, January 2014. Global Standards  

Vessel

Every description of watercraft used or capable of being used as a means of transportation on the water. The term does not include a structure that is or is designed to be, permanently affixed to one location, or a drilling or workover vessel that is stationary or fixed for the performance of its primary function. Source: Oil and Gas Division, Texas Administrative Code, Title 16, Chapter 3, February 2013. Regulations  

Vessel

Vessel means every description of watercraft or other artificial contrivance used, or capable of being used, as a means of transportation on water. Source: Outer Continental Shelf Activities, 33 CFR 140-147 (2013). Regulations  

Vessel

“Vessel” includes a hovercraft and any floating structure which is capable of being navigated. Source: The Health and Safety at Work etc. Act 1974 (Application outside Great Britain) Order 2001, UK S.I. 2013/214, 2013. Regulations

Vessel

Like the Petroleum Act, the Working Environment Act will apply to facilities in the petroleum activities. The term facility is the same as is used in the Petroleum Act, cf. the definition in Section 1-6, litera d of the Petroleum Act. The Working Environment Act has a different, narrower application for vessels than the Petroleum Act, but in the determination of what constitutes a facility and what constitutes a vessel, the same criteria as follow from the petroleum legislation form the basis. Reference is here made to the delimitation in the Petroleum Act in connection with Section 1-4 cf. Section 1-6 litera c, which further limits what vessels can be considered supply and standby vessels, cf. Odelsting Proposition No. 43 (1995-1996), pages 27 and 28. The term includes, in addition to vessels that transport personnel and equipment, crane barges and other service vessels, vessels used to carry out manned underwater operations, pipe-laying vessels, vessels that carry out seismic surveys, etc. On the other hand, e.g. mobile drilling facilities, drilling or production vessels, flotels, etc. will clearly be covered by the term facility. As follows from the second subsection, however, certain restrictions have been set in the actual scope in relation to the Petroleum Act, which entails that the Working Environment Act will have a somewhat more limited application as regards the vessel function. Source: Guidelines Regarding the Framework Regulations, Norway, updated December 2012. Regulatory Guidance

Vessel

Vessel means a vessel used in navigation, other than air navigation, and includes a barge, lighter or other floating vessel. Source: Offshore Petroleum and Greenhouse Gas Storage Act 2006, Australia, amended 2012. Legislation  

Vessel

“Vessel” includes a hovercraft and any floating structure which is capable of being staffed. Source: The Offshore Installations and Pipeline Works (Management and Administration) Regulations 1995, UK S.I. 1995/738, 1995. Regulations Source: The Offshore Installations (Safety Case) Regulations 2005, UK S.I. 2005/3117, 2005. Regulations  

Vessel

The word “vessel” includes every description of water craft, including non-displacement craft, WIG craft and seaplanes, used or capable of being used as a means of transportation on water. Source: IMO Resolution A.910(22), Amendments to the Convention on the International Regulations for Preventing Collisions at Sea, 1972, 22 January 2002, International Maritime Organization. Legislation  

Vessel

“Vessel” includes an aircraft, a hovercraft and any floating structure other than an offshore installation. Source: The Offshore Installations (Inspectors and Casualties) Regulations 1973, UK S.I. 1973/1842, 1973. Regulations

Unmanned Platform

Unmanned Platform

Definition(s)


Unmanned platform

A platform upon which persons may be employed at any one time, but upon which no living accommodations or quarters are provided. Source: API RP 2FB, Recommended Practice for the Design of Offshore Facilities Against Fire and Blast Loading, First Edition, April 2006. Global Standards

Unmanned platform

Unmanned platform means a fixed, bottom-founded OCS facility which is not a manned facility even though it may be continuously serviced by an attending vessel. Source: Outer Continental Shelf Activities, 33 CFR 140-147 (2013). Regulations
Owner

Owner

Definition(s)


Owner

The organization engaging a service provider to perform life cycle management on a managed product.
  • NOTE: The owner may be the equipment manufacturer or a service company for items such as rental tooling and/or equipment. For the purposes of this document, the owner may not necessarily be the legal owner of the equipment.
Source: API STANDARD 18LCM, Product Life Cycle Management System Requirements for the Petroleum and Natural Gas Industries, First Edition, April 2017. Global Standards

Owner

Owner means a person holding title to or, in the absence of title, other indicia of ownership of a unit; however, this does not include a person who holds indicia of ownership primarily to protect a security interest in the unit and does not participate in the management or operation of the unit. Source: Outer Continental Shelf Activities, 33 CFR 140-147 (2013). Regulations  

Owner

The individual, partnership, firm, or corporation to whom the United States issues a lease and has been assigned an obligation to make royalty payments required by the lease. Source: API RP 75, Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities: Upstream Segment, Third Edition, May 2004. Global Standards  

Owner

A party who owns physical infrastructure assets (pipelines, platforms, or terminals) and/or a party who owns capacity rights in those physical assets but does not own the asset itself. Source: API RP 2SIM, Structural Integrity Management of Fixed Offshore Structures, First Edition, November 2014. Global Standards  

Owner/user

An owner or user of pressure vessels who exercises control over the operation, engineering, inspection, repair, alteration, pressure testing and rerating of those pressure vessels. Source: API 510, Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and Alteration Downstream Segment, Ninth Edition, June 2006. Global Standards  

Owner

Entity having ownership of the new OCTG at the time inspection is contracted, specifying the type of inspection or testing to be conducted and authorizing its performance. NOTE The owner might be the purchaser. Source: API RP 5A5, Field Inspection of New Casing, Tubing, and Plain-end Drill Pipe, Reaffirmed August 2010. Global Standards  

Owner

'Owner' means an entity legally entitled to control the operation of a non-production installation. Source: DIRECTIVE 2013/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 12 June 2013 on safety of offshore oil and gas operations and amending Directive 2004/35/EC. Legislation  

Owner

"Owner" means the person who has the right to drill into and produce from a pool and to appropriate the oil or gas the person produces therefrom either for that person or others or for that person and others. Source: Control of Oil and Gas Resources, North Dakota Century Code, Title 38, Chapter 8, February 2013 Legislation  

Owner

Owner, in relation to a vessel, means:
  1. if the vessel is being operated by a person who:
    1. does not own the vessel; and
    2. has the whole possession and control of the vessel; the person operating the vessel; or
  2. in any other case—the person who owns the vessel.
Source: Offshore Petroleum and Greenhouse Gas Storage Act 2006, Australia, amended 2012. Legislation  

Owner

Representative of the company or companies which own a development, who can be the operator on behalf of co-licensees. Source: ISO 19901-7:2013, Petroleum and natural gas industries – Specific requirements for offshore structures – Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units. Global Standards  

Owner

Representative of the company or companies owning or leasing a development Source: ISO 19900:2013, Petroleum and natural gas industries – General requirements for offshore structures. Global Standards  

Owner

A person, other than a lien holder, who has an asset or title to a petroleum and natural gas industry system, facility, or equipment and is
  • (a) responsible for the ongoing operation of a petroleum and natural gas industry system; or
  • (b) in charge of managing the operation of a petroleum and natural gas industry system, if all or part of the petroleum and natural gas industry system are owned jointly by different persons.
Source: Canadian Standards Association, Z246.1-09, Security management for petroleum and natural gas industry systems, August 2009, Regional Standards  

Owner

Company or person who specifies the type of inspection or testing to be conducted and who has the authority to order it performed. Source: API RP 7G-2, Recommended Practice for Inspection and Classification of Used Drill Stem Elements, First Edition, August 2009. Global Standards  

Owner

Individual, legal entity or organization holding legal title to the equipment. Source: API RP 8B, Recommended Practice for Procedures for Inspections, Maintenance, Repair and Remanufacture of Hoisting Equipment, Seventh Edition, March 2002 (Reaffirmed: August 2012). Global Standards  

Owner

OWNER shall mean the person who has the right to drill into and produce from a pool and to appropriate the oil or gas produced therefrom either for such owner or others or for such owner and others, including owners of a well capable of producing oil or gas, or both. Source: Oil and Gas Conservation Commission, Practice and Procedure, Code of Colorado Regulations, 2 CCR 404-1, February 2013. Regulations  

Owner

The word “operator”  is used in these rules and regulations and accompanying forms interchangeably with the same meaning as the term “owner”  except in Rules 301, 323, 401 and 530 where the word “operator”  is used to identify the persons designated by the owner or owners to perform the functions covered by those rules. Source: Oil and Gas Conservation Commission, Practice and Procedure, Code of Colorado Regulations, 2 CCR 404-1, February 2013. Regulations  

Owner

The words POOL, PERSON, OWNER, PRODUCER, OIL, GAS, WASTE, CORRELATIVE RIGHTS and COMMON SOURCE OF SUPPLY are defined by the Act, and said definitions are hereby adopted in these Rules and Regulations. From C.R.S. 34-60-103 (2012): "Owner" means the person who has the right to drill into and produce from a pool and to appropriate the oil or gas he produces therefrom either for himself or others or for himself and others, including the owner of a well capable of producing oil or gas, or both. Source: Oil and Gas Conservation Commission, Practice and Procedure, Code of Colorado Regulations, 2 CCR 404-1, February 2013. Regulations  

Owner

Owner―as used herein, shall have the meaning as such term is defined in Title 30 of the Louisiana Revised Statutes of 1950. Source: Natural Resources, Office of Conservation – General Operations, Louisiana Administrative Code, Title 43, Part XIX, March 2013. Regulations  

Owner

“Owner” includes a trustee, receiver, mortgagee in possession, tenant, lessee or occupier of lands or premises used as a workplace and a person who acts for, or on behalf of, an owner as an agent or delegate. Source:  Nova Scotia Offshore Petroleum Occupational Health & Safety Requirements, Canada-Nova Scotia Offshore Petroleum Board, Canada, December 2000. Regulations  

Owner

“Owner” means the person who has the right to drill into and to produce from a pool, and to appropriate the production either for the person or for the person and another. Source: Oil and Gas, New Mexico Administrative Code Title 19, Chapter 15, January 2013. Regulations  

Owner

“Owner” means the person who has the right to drill on a tract or drilling unit and to drill into and produce from a pool and to appropriate the oil or gas that he produces therefrom either for himself or for others. Source: Division of Mineral Resources Management - Oil and Gas, Ohio Administrative Code, Chapter 1501:9, January 2012. Regulations  

Owner

“Owner or operator” means the owner or operator of any facility or activity subject to regulation under Chapter 1501:9-7 of the Administrative Code. Source: Division of Mineral Resources Management - Oil and Gas, Ohio Administrative Code, Chapter 1501:9, January 2012. Regulations  

Owner

"Owner" means the person or persons who have the right to drill into and to produce from any common source of supply, and to appropriate the production either for himself, or for himself and others. Source: Corporation Commission, Oil and Gas Conservation, Oklahoma Administrative Code 165:10, February 2013. Regulations  

Owner

In sections 86 to 107, “owner” means any person who is entitled to compensation under section 75. Source: National Energy Board Act, R.S.C., 1985, c. N-7, Canada, current to April 29, 2013. Legislation  

Owner

Owner—A person who owns, manages, leases, controls or possesses a well or coal property. For purposes of sections 203(a)(4) and (5) and 210 of the act (58 P. S. § §  601.203(a)(4) and (5) and 601.210), the term does not include those owners or possessors of surface real property on which the abandoned well is located who did not participate or incur costs in the drilling or extraction operation of the abandoned well and had no right of control over the drilling or extraction operation of the abandoned well. The term does not apply to orphan wells except where the Department determines a prior owner or operator benefited from the well as provided in section 210(a) of the act. Source: Oil and Gas Wells, Pennsylvania Code, Title 25, Chapter 78, December 2012. Regulations  

Owner

The person recognized by the Commission as owning all or part of a storage facility, or such person's authorized representative. Source: Oil and Gas Division, Texas Administrative Code, Title 16, Chapter 3, February 2013. Regulations  

Owner

The person who owns a facility or part of a facility. Source: Oil and Gas Division, Texas Administrative Code, Title 16, Chapter 3, February 2013. Regulations  

Owner

Detailed guidance on the definition of ‘owner’ is set out in guidance to MAR, regulation. Source: Prevention of Fire and Explosion, and Emergency Response on Offshore Installations, Offshore Installations (Prevention of Fire and Explosion, and Emergency Response) Regulations 1995, Approved Code of Practice and guidance (UK HSE L65), Second Edition, 1997. Regulatory Guidance  

Owner

The definition of ‘owner’ in these Regulations is new and replaces the definition formerly found in the Mineral Workings (Offshore Installations) Act 1971 (MWA). The MWA definition was linked to registration, but the requirement to register installations is revoked by these Regulations. The new definition refers to the person who controls the operation of the installation, ie the person who contracts with the operator to use the installation for oil and gas related activity. This will normally be the same person as under the definition formerly used in the MWA. It does not refer to the operator (who contracts with the owner) or to the installation manager, who is appointed by the owner (see regulation 6). The owner as defined in these Regulations may not be the owner in the ordinary financial sense. Source: A Guide to the Offshore Installations and Pipelines Works (Management and Administration) Regulations 1995, Guidance on Regulations (UK HSE L70), Second Edition, 2002. Regulatory Guidance  

Owner

This regulation maintains the application offshore of the 1969 Act, with modifications, though the 1975 Regulations which originally applied the Act offshore are revoked (see Schedule 2). The definitions (eg of ‘owner’) have been brought into line with those used in MAR. However, ‘owner’ here applies to both fixed and mobile offshore installations, rather than using the term ‘operator’ in respect of fixed installations. Source: A Guide to the Offshore Installations and Pipelines Works (Management and Administration) Regulations 1995, Guidance on Regulations (UK HSE L70), Second Edition, 2002. Regulatory Guidance  

Owner

“Owner” in relation to a mobile installation means the person who controls the operation of the installation. Source: The Offshore Installations and Pipeline Works (Management and Administration) Regulations 1995, UK S.I. 1995/738, 1995. Regulations  

Owner

In regulation 2(1) (definitions) of the Diving Operations at Work Regulations 1981(3) (“the 1981 Regulations”) there shall be added, after the definition of “offshore installation” the following definition: ““owner”, in relation to an offshore installation, means the person who is, in relation to the installation, the duty holder as defined by regulation 2(1) of the Offshore Installations and Pipeline Works (Management and Administration) Regulations 1995 in relation to that installation”. Source: The Offshore Installations and Pipeline Works (Management and Administration) Regulations 1995, UK S.I. 1995/738, 1995. Regulations  

Owner

In regulation 2 (interpretation) of the Offshore Installations (Emergency Pipe-line Valve) Regulations 1989 (Note: S.I. 1989/1029.) for the definition of “owner” there shall be substituted the following definition: ““owner”, in relation to—
  1. an offshore installation, means the person who is, in relation to the installation, the duty holder as defined by regulation 2(1) of the 1995 Regulations in relation to that installation; and
  2. a pipeline in respect of which no person has been designated as its owner in pursuance of section 33(3) of the 1975 Act, means the person in whom the pipeline is vested”.
Source: The Offshore Installations and Pipeline Works (Management and Administration) Regulations 1995, UK S.I. 1995/738, 1995. Regulations  

Owner

In regulation 2 (interpretation) of the Offshore Installations (Safety Case) Regulations 1992 (Note: S.I. 1992/2885.) (“the 1992 Regulations”) in paragraph (1) (definitions) for paragraph (a) of the definition of “owner” there shall be substituted the following paragraph: “(a)a mobile installation means the person who controls the operation of the installation”. Source: The Offshore Installations and Pipeline Works (Management and Administration) Regulations 1995, UK S.I. 1995/738, 1995. Regulations  

Owner

“Owner” in relation to a mobile installation means the person who controls the operation of the installation. Source: The Offshore Installations (Prevention of Fire and Explosion, and Emergency Response) Regulations 1995, S.I. 1995/743, 1995. Regulations  

Owner

“Owner”, in relation to a borehole site, means the person who has the right to undertake the borehole operations which are being or are to be undertaken at the site. Source: The Borehole Sites and Operations Regulations 1995, UK S.I. 1995/2038, 1995. Regulations Source: The Offshore Installations (Safety Case) Regulations 2005, UK S.I. 2005/3117, 2005. Regulations  

Owner

The full extent of hazards can only be recognised by a thorough examination of the worksite by those responsible for the work. This responsibility can be referred to as “ownership”. Source: Approved Code of Practice for Managing Hazards to Prevent Major Industrial Accidents, Health and Safety in Employment Act 1992, Department of Labour, New Zealand, July 1994. Regulatory Guidance  

Owner

Owner means— (a) the employer appointed by the permit operator to control the operation of a non production installation; or (b) the permit operator, if the permit operator is an employer of employees on the non production installation, or at the well site, and— (i) no employer is appointed; or (ii) the permit operator has notified the appointed employer in writing that the permit operator is to be treated as the owner for the purposes of these regulations. Source: Health and Safety in Employment (Petroleum Exploration and Extraction) Regulations 2013, SR 2013/208, New Zealand, as of May 2013. Regulations  

Owner

In the context of these Rules, the Owner is defined as the party responsible for the unit, including its operation and safety. Source: Rules and Regulations for the Classification of Mobile Offshore Units, Part 1, Regulations, June 2013, Lloyd’s Register, Global Standards  

Eigenaar van de niet-productie-installatie (Dutch)

„eigenaar van de niet-productie-installatie”: een entiteit die wettelijk bevoegd is om de werking van een niet-productie-installatie te beheren. Source: DIRECTIVE 2013/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 12 June 2013 on safety of offshore oil and gas operations and amending Directive 2004/35/EC. Legislation  

Propriétaire (French)

«propriétaire», une entité juridiquement habilitée à contrôler l’exploitation d’une installation non destinée à la production. Source: DIRECTIVE 2013/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 12 June 2013 on safety of offshore oil and gas operations and amending Directive 2004/35/EC. Legislation  

Ejer (Danish)

»ejer«: en enhed, der er retligt beføjet til at styre driften af et ikke-produktionsanlæg. Source: DIRECTIVE 2013/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 12 June 2013 on safety of offshore oil and gas operations and amending Directive 2004/35/EC. Legislation  

Propietario (Spanish)

«propietario»: la entidad jurídicamente habilitada para controlar la operación de una instalación no destinada a la producción. Source: DIRECTIVE 2013/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 12 June 2013 on safety of offshore oil and gas operations and amending Directive 2004/35/EC. Legislation  

Proprietar (Romanian)

„proprietar” înseamnă o entitate care are dreptul legal de a controla exploatarea unei instalații neproductive. Source: DIRECTIVE 2013/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 12 June 2013 on safety of offshore oil and gas operations and amending Directive 2004/35/EC. Legislation  

Eigentümer (German)

„Eigentümer“ eine Einrichtung, die rechtlich befugt ist, den Betrieb einer Nichtförderanlage zu steuern. Source: DIRECTIVE 2013/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 12 June 2013 on safety of offshore oil and gas operations and amending Directive 2004/35/EC. Legislation  

ιδιοκτήτης (Greek)

«ιδιοκτήτης» σημαίνει οντότητα εξουσιοδοτημένη κατά τον νόμο να ελέγχει τη λειτουργία μη παραγωγικής εγκατάστασης. Source: DIRECTIVE 2013/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 12 June 2013 on safety of offshore oil and gas operations and amending Directive 2004/35/EC. Legislation  

Proprietario (Italian)

«proprietario»: un’entità legalmente autorizzata a condurre un impianto non destinato alla produzione. Source: DIRECTIVE 2013/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 12 June 2013 on safety of offshore oil and gas operations and amending Directive 2004/35/EC. Legislation  

właściciel (Polish)

„właściciel” oznacza podmiot prawnie upoważniony do sprawowania kontroli nad działaniem instalacji innej niż wydobywcza. Source: DIRECTIVE 2013/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 12 June 2013 on safety of offshore oil and gas operations and amending Directive 2004/35/EC. Legislation  

Proprietário (Portuguese)

«Proprietário», uma entidade legalmente habilitada a controlar o funcionamento de uma instalação de não-produção. Source: DIRECTIVE 2013/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 12 June 2013 on safety of offshore oil and gas operations and amending Directive 2004/35/EC. Legislation  

ägare (Swedish)

en enhet som har laglig rätt att kontrollera driften av en icke producerande anläggning. Source: API RP 7G-2, Recommended Practice for Inspection and Classification of Used Drill Stem Elements, First Edition, August 2009. Global Standards  

Omistajalla (Finnish)

tarkoitetaan toimijaa, jolla on laillinen oikeus valvoa muun kuin tuotantolaitteiston toimintaa. Source: API RP 7G-2, Recommended Practice for Inspection and Classification of Used Drill Stem Elements, First Edition, August 2009. Global Standards  

savininkas (Lithuanian)

subjektas, teisiškai turintis teisę kontroliuoti gavybai neskirto įrenginio eksploatavimą. Source: Outer Continental Shelf Activities, 33 CFR 140-147 (2013). Regulations  

tulajdonos (Hungarian)

a nem termelő létesítmény üzemeltetésének ellenőrzésére jogszerűen felhatalmazott jogalany. Source: Outer Continental Shelf Activities, 33 CFR 140-147 (2013). Regulations  

sid (Maltese)

tfisser entità legalment intitolata li tikkontrolla l-operat ta’ installazzjoni mhux tal-produzzjoni. Source: Outer Continental Shelf Activities, 33 CFR 140-147 (2013). Regulations  

īpašnieks (Latvian)

ir vienība, kurai ir likumīgas tiesības kontrolēt ar ieguvi nesaistītas iekārtas darbību. Source: Outer Continental Shelf Activities, 33 CFR 140-147 (2013). Regulations  

omanik (Estonian)

ettevõtja, kellel on juriidiline õigus kontrollida tootmisvälise rajatise tööd. Source: Outer Continental Shelf Activities, 33 CFR 140-147 (2013). Regulations  

vlastníkem (Czech)

subjekt s právním nárokem kontrolovat provoz jiného než těžebního zařízení. Source: Outer Continental Shelf Activities, 33 CFR 140-147 (2013). Regulations  

собственик (Bulgarian)

означава субект, на който нормативно е възложен контролът върху дейността на непроизводствена инсталация. Source: Outer Continental Shelf Activities, 33 CFR 140-147 (2013). Regulations