Regulations

Definition(s)

---

Waste of oil, gas, or sulphur

Waste of oil, gas, or sulphur means:

1. The physical waste of oil, gas, or sulphur;
2. The inefficient, excessive, or improper use, or the unnecessary dissipation of reservoir energy;
3. The locating, spacing, drilling, equipping, operating, or producing of any oil, gas, or sulphur well(s) in a manner that causes or tends to cause a reduction in the quantity of oil, gas, or sulphur ultimately recoverable under prudent and proper operations or that causes or tends to cause unnecessary or excessive surface loss or destruction of oil or gas; or
4. The inefficient storage of oil.

Source: Oil and Gas and Sulphur Operations in the Outer Continental Shelf, 30 CFR 250 (2013). Regulations  

Waste

"Waste" means and includes:

1. Physical waste, as that term is generally understood in the oil and gas industry.
2. The inefficient, excessive, or improper use of, or the unnecessary dissipation of reservoir energy.
3. The locating, spacing, drilling, equipping, operating, or producing of any oil or gas well or wells in a manner which causes, or tends to cause, reduction in the quantity of oil or gas ultimately recoverable from a pool under prudent and proper operations, or which causes or tends to cause unnecessary or excessive surface loss or destruction of oil or gas.
4. The inefficient storing of oil.
5. The production of oil or gas in excess of transportation or marketing facilities or in excess of reasonable market demand.

Source: Control of Oil and Gas Resources, North Dakota Century Code, Title 38, Chapter 8, February 2013. Legislation  

Waste

“Waste” includes:

1. the inefficient, excessive or improper use or dissipation of reservoir energy,
2. the locating, spacing, drilling, equipping, operating or producing of any well or wells in a manner that results or could result in reducing the quantity of oil or gas ultimately recoverable from any pool,
3. the inefficient storing of oil or gas, whether on the surface or underground,
4. the producing of oil or gas in excess of transportation or marketing facilities or of reasonable market demand, and
5. the locating, drilling, equipping, operating or producing of a well or wells in a manner that causes or could cause unnecessary or excessive surface loss or destruction of oil or gas (déperdition).

Source: Canada Oil and Gas Drilling and Production Regulations, C.R.C., c. 1517, February 2013. Regulations  

Waste

“Waste”, in addition to its ordinary meaning, means waste as understood in the petroleum industry and in particular, but without limiting the generality of the foregoing, includes

1. the inefficient or excessive use or dissipation of reservoir energy;
2. the locating, spacing or drilling of a well within a field or pool or within part of a field or pool or the operating of any well that, having regard to sound engineering and economic principles, results or tends to result in a reduction in the quantity of petroleum ultimately recoverable from a pool;
3. the drilling, equipping, completing, operating or producing of any well in a manner that causes or is likely to cause the unnecessary or excessive loss or destruction of petroleum after removal from the reservoir;
4. the inefficient storage of petroleum above ground or underground;
5. the production of petroleum in excess of available storage, transportation or marketing facilities;
6. the escape or flaring of gas that could be economically recovered and processed or economically injected into an underground reservoir; or
7. the failure to use suitable artificial, secondary or supplementary recovery methods in a pool when it appears that such methods would result in increasing the quantity of petroleum ultimately recoverable under sound engineering and economic principles.

Source: Canada-Nova Scotia Offshore Petroleum Resources Accord Implementation Act, S.C. 1988, c. 28, Canada, current to May 26, 2013. Legislation Source: Drilling and Production Guidelines, The Canada-Nova Scotia Offshore Petroleum Board and Canada-Newfoundland and Labrador Offshore Petroleum Board, Canada, March 31, 2011. Regulatory Guidance Source: Canada Oil and Gas Operations Act, R.S.C., 1985, c. O-7, Canada, current to April 29, 2013. Legislation  

Waste

Waste:

1. Any substance which constitutes a scrap material or an effluent or any other unwanted surplus substance arising from the application of any process; and
2. Any substance or article which requires to be disposed of as being broken, worn out, contaminated or otherwise spoiled.

Source: International Association of Drilling Contractors, Appendix 2 to Health, Safety and Environment Case Guidelines for Offshore Drilling Contractors, Issue 3.3.2, February 2010. IADC Guidelines  

Waste

The words POOL, PERSON, OWNER, PRODUCER, OIL, GAS, WASTE, CORRELATIVE RIGHTS and COMMON SOURCE OF SUPPLY are defined by the Act, and said definitions are hereby adopted in these Rules and Regulations. From C.R.S. 34-60-103 (2012): "Waste", as applied to gas, includes the escape, blowing, or releasing, directly or indirectly into the open air, of gas from wells productive of gas only, or gas in an excessive or unreasonable amount from wells producing oil, or both oil and gas; and the production of gas in quantities or in such manner as unreasonably reduces reservoir pressure or unreasonably diminishes the quantity of oil or gas that ultimately may be produced; excepting gas that is reasonably necessary in the drilling, completing, testing, and in furnishing power for the production of wells. "Waste", as applied to oil, includes underground waste; inefficient, excessive, or improper use or dissipation of reservoir energy, including gas energy and water drive; surface waste; open-pit storage; and waste incident to the production of oil in excess of the producer's aboveground storage facilities and lease and contractual requirements, but excluding storage, other than open-pit storage, reasonably necessary for building up or maintaining crude stocks and products thereof for consumption, use, and sale. "Waste", in addition to the meanings as set forth in subsections (11) and (12) of this section, means:

1. Physical waste, as that term is generally understood in the oil and gas industry;
2. The locating, spacing, drilling, equipping, operating, or producing of any oil or gas well or wells in a manner which causes or tends to cause reduction in quantity of oil or gas ultimately recoverable from a pool under prudent and proper operations or which causes or tends to cause unnecessary or excessive surface loss or destruction of oil or gas;
3. 
Abuse of the correlative rights of any owner in a pool due to nonuniform, disproportionate, unratable, or excessive withdrawals of oil or gas therefrom, causing reasonably avoidable drainage between tracts of land or resulting in one or more producers or owners in such pool producing more than his equitable share of the oil or gas from such pool.

Source: Oil and Gas Conservation Commission, Practice and Procedure, Code of Colorado Regulations, 2 CCR 404-1, February 2013. Regulations    

Waste

“Waste” includes the following:

1. The inefficient, excessive, or improper use or dissipation of reservoir energy, and the locating, spacing, drilling, equipping, operating or producing or any oil or gas well in a manner which results or tends to result in reducing the quantity of oil or gas ultimately to be recovered from any pool;
2. the inefficient storing of petroleum; and the locating, spacing, drilling, equipping, operating or producing of any oil or gas well in a manner causing or tending to cause unnecessary or excessive surface loss or destruction of petroleum or natural gas;
3. producing petroleum or natural gas in such a manner as to cause unnecessary channelling of water or gas or both, or coming of water;
4. the submerging with water of any stratum or part thereof capable of producing petroleum or natural gas;
5. the creation of unnecessary fire hazards;
6. the escape into the open air, from a well producing both petroleum and natural gas, of gas in excess of the amount which is necessary for efficient production from the well; and
7. permitting gas produced from a gas well to escape into open air.

Source: The Petroleum and Natural Gas Rules, 1959 (As amended from time to time), India, as amended as of May 2013. Regulations