Actual Opportunity

Actual Opportunity

Definition(s)


Actual Opportunity

An actual opportunity means that the employees are involved sufficiently early in the decision process for their input to amount to part of the basis for making decisions. Source: Guidelines Regarding the Framework Regulations, Norway, updated December 2012. Regulatory Guidance
Acknowledgement of Compliance (AoC)

Acknowledgement of Compliance (AoC)

Definition(s)


Acknowledgement of Compliance (AoC)

An Acknowledgement of Compliance (AoC) is a statement from the Petroleum Safety Authority Norway that expresses the authorities' confidence that petroleum activities can be carried out using the 27 facility within the framework of the regulations. Source: Guidelines Regarding the Framework Regulations, Norway, updated December 2012. Regulatory Guidance
Interested Province

Interested Province

Definition(s)


Interested Province

For the purposes of this section and sections 47, 48, 50 and 51, "interested province" means
  1. a province in which the project is to be carried out; or
  2. a province that claims that significant adverse environmental effects may occur in that province as a result of the project.
Source: Canadian Environmental Assessment Act, 1992, c. 37, Canada, as consolidated November 2003. Legislation
Simpler Facilities

Simpler Facilities

Definition(s)


Simpler Facilities, with accommodation

Facilities that are normally not manned, and which are equipped with emergency quarters. Source: Regulations relating to design and outfitting of facilities, etc. in the petroleum activities (the Facilities Regulations), Norway, April 2010 (amended December 2012). Regulations  

Simpler Facilities, without accommodation

Facilities without accommodation and helicopter deck, and which are a) only manned in connection with maintenance, b) only manned in daylight and during prudent weather conditions so that the personnel can leave the facility in a safe manner after completing work, c) not part of an integrated development concept or do not pose a danger to other facilities in the area or in some other manner affect the operation of other facilities in an unacceptable manner. Source: Regulations relating to design and outfitting of facilities, etc. in the petroleum activities (the Facilities Regulations), Norway, April 2010 (amended December 2012). Regulations
Follow-up Program

Follow-up Program

Definition(s)


Follow-up Program

“Follow-up program” means a program for
  1. verifying the accuracy of the environmental assessment of a project, and
  2. determining the effectiveness of any measures taken to mitigate the adverse environmental effects of the project; programme de suivi.
Source: Canadian Environmental Assessment Act, 1992, c. 37, Canada, as consolidated November 2003. Legislation
Safety System

Safety System

Definition(s)


Safety System

Essential system consisting of a series of sub-systems and performing a series of essential functions (i.e. essential safety functions) preventing the use of the gangway outside its operational limitations (e.g. overload systems, break-away system, automatic release, etc.). Source: Offshore Gangways, DNVGL-ST-0358, DNV GL, September 2017. Global Standards

Safety System 3.1.6

System which realizes one or more safety functions. Source: ISO/TR 12489:2013(E). Global Standards  

Safety System

A system that realises one or more active safety functions. Source: Regulations relating to design and outfitting of facilities, etc. in the petroleum activities (the Facilities Regulations), Norway, April 2010 (amended December 2012). Regulations Source: Regulations Relating to Technical and Operational Matters at Onshore Facilities in the Petroleum Activities, etc. (The Technical and Operational Regulations) Norway, April 2010 (amended December 2010). Regulations
Federal Lands

Federal Lands

Definition(s)


Federal Lands

“Federal lands” means
  1. lands that belong to Her Majesty in right of Canada, or that Her Majesty in right of Canada has the power to dispose of, and all waters on and airspace above, those lands, other than lands under the administration and control of the Commissioner of Yukon, the Northwest Territories or Nunavut,
  2. the following lands and areas, namely,
  3. the internal waters of Canada,
  4. the territorial sea of Canada,
  5. the exclusive economic zone of Canada, and
  6. the continental shelf of Canada, and
  7. reserves, surrendered lands and any other lands that are set apart for the use and benefit of a band and are subject to the Indian Act, and all waters on and airspace above those reserves or lands; territoire domanial.
Source: Canadian Environmental Assessment Act, 1992, c. 37, Canada, as consolidated November 2003. Legislation
Pipeline Systems

Pipeline Systems

Definition(s)


Pipeline Systems

Pipe with components subject to the same design conditions and typically used to transport fluids between wells and field facilities, field facilities and processing plants, processing plants and storage facilities. Source: ISO 14692-1:2017, Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials, Second Edition, August 2017. Global Standards

Pipeline Systems

Subsea pipelines and risers that transport hydrocarbons and other fluids, with associated safety systems, valves, chambers, corrosion protection systems, etc. Source: Regulations relating to design and outfitting of facilities, etc. in the petroleum activities (the Facilities Regulations), Norway, April 2010 (amended December 2012). Regulations  

Pipeline Systems

Pipeline systems mean pipeline systems for landing petroleum from the shelf to onshore facilities as well as pipeline systems that transport other fluids in connection with operation of facilities on the shelf, pipeline systems for export of gas from onshore facilities to the Continent, possibly via a facility on the shelf, and pipeline systems for transport of petroleum between onshore facilities covered by these regulations. Source: Guidelines Regarding the Framework Regulations, Norway, updated December 2012. Regulatory Guidance  

Pipeline Systems

“Pipeline system” means subsea pipelines and risers transporting hydrocarbons and other commodities, with associated safety systems, valves, tool launchers or receivers, manifolds, corrosion protection systems or other accessory equipment Source: Petroleum and Natural Gas (Safety in Offshore Operations) Rules, 2008, India, 18th June 2008. Regulations
Federal Authority

Federal Authority

Definition(s)


Federal Authority

“Federal authority” means
  1. Minister of the Crown in right of Canada,
  2. an agency of the Government of Canada, a parent Crown corporation, as defined in subsection 83(1) of the Financial Administration Act, or any other body established by or pursuant to an Act of Parliament that is unltimately accountable through a Minister of the Crown in right of Canada to Parliament for the conduct of its affairs,
  3. any department or departmental corporation set out in Schedule I or II to the Financial Administration Act, and
  4. any other body that is prescribed pursuant to regulations made under paragraph 59(e), but does not include the Executive Council of — or a minister, department, agency or body of the government of — Yukon, the Northwest Territories or Nunavut, a council of the band within the meaning of the Indian Act, Export Development Canada, the Canada Pension Plan Investment Board, a Crown corporation that is a wholly-owned subsidiary, as defined in subsection 83(1) of the Financial Administration Act, The Hamilton Harbour Commissioners as constituted pursuant to The Hamilton Harbour Commissioners' Act, a harbour commission established pursuant to the Harbour Commissions Act, a not-for-profit corporation that enters into an agreement under subsection 80(5) of the Canada Marine Act or a port authority established under that Act; autorité fédérale.
Source: Canadian Environmental Assessment Act, 1992, c. 37, Canada, as consolidated November 2003. Legislation
Permanently Manned Facilities

Permanently Manned Facilities

Definition(s)


Permanently Manned Facilities

Facilities that are continuously manned, or which are part of an integrated development concept with gangway connections. Source: Regulations relating to design and outfitting of facilities, etc. in the petroleum activities (the Facilities Regulations), Norway, April 2010 (amended December 2012). Regulations  

Permanently Manned Facilities

“Permanently manned facilities” means facilities that are continuously manned, or which are incorporated as a part of an integrated development concept with bridge connections Source: Petroleum and Natural Gas (Safety in Offshore Operations) Rules, 2008, India, 18th June 2008. Regulations
Load-Bearing Structures

Load-Bearing Structures

Definition(s)


Load-Bearing Structures

Those parts of the facility whose primary task is to transfer loads/actions. Source: Regulations relating to design and outfitting of facilities, etc. in the petroleum activities (the Facilities Regulations), Norway, April 2010 (amended December 2012). Regulations  

Load-Bearing Structures

“Load bearing structures” means those parts of the facility for which the main purpose is transfer of loads. Source: Petroleum and Natural Gas (Safety in Offshore Operations) Rules, 2008, India, 18th June 2008. Regulations
Lifting Gear

Lifting Gear

Definition(s)


Lifting Gear

Components or equipment used between the lifting appliance and the load or to grip the load, and which are not an integrated part of the lifting appliance. Source: Regulations relating to design and outfitting of facilities, etc. in the petroleum activities (the Facilities Regulations), Norway, April 2010 (amended December 2012). Regulations
Lifting Appliance

Lifting Appliance

Definition(s)


Lifting Appliance

A composite unit used for hoisting and lowering loads, with or without horizontal movement. Source: Regulations relating to design and outfitting of facilities, etc. in the petroleum activities (the Facilities Regulations), Norway, April 2010 (amended December 2012). Regulations  

Lifting Appliance

machine or device used for vertical movement of a load, with or without horizontal movement NOTE: Include cranes, hoists, drilling hoisting equipment and launching and recovery appliances for life saving equipment etc. Source: Rules for Classification and Construction, IV Industrial Services, 6 Offshore Technology, 9 Guideline for Personnel Transfers by Means of Lifting Appliances, Edition 2011, Germanischer Lloyd SE, Global Standards
High Pressure and High Temperature Wells (HPHT Wells)

High Pressure and High Temperature Wells (HPHT Wells)

Definition(s)


HPHT Wells

High pressure and high temperature well with expected shut-in pressure exceeding 69 MPa, or a static bottomhole temperature higher than 150 °C. Source: NORSOK D-010, Well integrity in drilling and well operations, Rev. 3, August 2004. Global Standards  

High Pressure and High Temperature Wells (HPHT Wells)

Wells with an expected shut-in pressure greater than 69 MPa (690 bar), or a temperature higher than 150 °C. Source: Regulations relating to design and outfitting of facilities, etc. in the petroleum activities (the Facilities Regulations), Norway, April 2010 (amended December 2012). Regulations  

High Pressure or High Temperature (HP/HT) Well

The current definition of high pressure or high temperature or both (HP/HT) wells is as follows: when the wellhead shut-in pressure exceeds 690 bars; the bottom hole static temperature exceeds 150°C. Source: NORSOK D-001, Drilling facilities, Rev. 3, December 2012. Global Standards
Design Accidental Load/Action

Design Accidental Load/Action

Definition(s)


Design Accidental Load/Action

An accidental load/action that the facility or a function shall be able to withstand for a defined period of time. Source: Regulations relating to design and outfitting of facilities, etc. in the petroleum activities (the Facilities Regulations), Norway, April 2010 (amended December 2012). Regulations
Class H Fire Division

Class H Fire Division

Definition(s)


Class H Fire Division

A division manufactured in incombustible materials that satisfies the following criteria: a) it is sufficiently reinforced, b) it prevents the spread of flames and smoke for at least two hours of the standardised fire test, c) it is designed so that the average temperature and the temperature of any single point on the unexposed side do not rise more than 140°C and 180°C, respectively, above the original temperature within the following timeframes: – class H-120: 120 minutes, – class H-60: 60 minutes, – class H-0: 0 minutes, d) any insulation materials are fire-tested at an institution that is internationally or nationally recognised in the specific discipline. Source: Regulations relating to design and outfitting of facilities, etc. in the petroleum activities (the Facilities Regulations), Norway, April 2010 (amended December 2012). Regulations
Class B Fire Division

Class B Fire Division

Definition(s)


Class B Fire Division

A division manufactured in incombustible materials that satisfies the following criteria: a) it prevents the spread of flames for at least half an hour of the standardised fire test, b) it is designed so that the average temperature on the unexposed side does not rise more than 140°C above the original temperature. In addition, the temperature at any single point shall not rise more than 225°C above the original temperature within the following timeframes: – class B-30: 30 minutes, – class B-15: 15 minutes, – class B- 0: 0 minutes. Source: Regulations relating to design and outfitting of facilities, etc. in the petroleum activities (the Facilities Regulations), Norway, April 2010 (amended December 2012). Regulations
Class A Fire Division

Class A Fire Division

Definition(s)


Class A Fire Division

A division manufactured in incombustible materials that satisfies the following criteria: a) it is sufficiently reinforced, b) it prevents the spread of flames and smoke for at least one hour of the standardised fire test, c) it is designed so that the average temperature and the temperature of any single point on the unexposed side do not rise more than 140°C and 180°C, respectively, above the original temperature within the following timeframes: – class A-60: 60 minutes, – class A-30: 30 minutes, – class A-15: 15 minutes, – class A- 0: 0 minutes, d) any insulation materials are fire-tested at an institution that is internationally or nationally recognised in the specific discipline. Source: Regulations relating to design and outfitting of facilities, etc. in the petroleum activities (the Facilities Regulations), Norway, April 2010 (amended December 2012). Regulations
Anchoring System

Anchoring System

Definition(s)


Anchoring System

An anchoring system of the catenary type or a combination of thruster system and catenary-type anchoring. Source: Regulations relating to design and outfitting of facilities, etc. in the petroleum activities (the Facilities Regulations), Norway, April 2010 (amended December 2012). Regulations
Exclusion List

Exclusion List

Definition(s)


Exclusion List

“Exclusion list” means a list of projects or classes of projects that have been exempted from the requirement to conduct an assessment by regulations made under paragraph 59(c) or (c.1); liste d'exclusion. Source: Canadian Environmental Assessment Act, 1992, c. 37, Canada, as consolidated November 2003. Legislation
Well Safety

Well Safety

Definition(s)


Well Safety

Well safety as mentioned in litera j, means blowout prevention, choke and pressure control systems, diverter systems, subsurface safety valves and quick release coupling system. Source: Guidelines Regarding the Facilities Regulations, Norway, updated December 2012. Regulatory Guidance
Unambiguous Command Structure

Unambiguous Command Structure

Definition(s)


Unambiguous Command Structure

An unambiguous command structure means that the flow of signals and command hierarchy is clearly stated. Source: Guidance Notes on Petroleum and Natural Gas (Safety in Offshore Operations) Rules, 2008, Oil Industry Safety Directorate (India), 2012. Regulatory Guidance

Unambiguous Command Structure

An unambiguous command structure as mentioned in the second subsection, means that the flow of signals and command hierarchy are clearly stated. Source: Guidelines Regarding the Facilities Regulations, Norway, updated December 2012. Regulatory Guidance Source: Guidelines Regarding the Technical and Operational Regulations, Norway, updated December 2012. Regulatory Guidance
Sufficient Capacity

Sufficient Capacity

Definition(s)


Sufficient Capacity

Sufficient capacity means the capacity necessary to supply all firefighting equipment in the facility's largest fire area plus the largest of the adjacent areas. Source: Guidance Notes on Petroleum and Natural Gas (Safety in Offshore Operations) Rules, 2008, Oil Industry Safety Directorate (India), 2012. Regulatory Guidance

Sufficient Capacity

Sufficient capacity as mentioned in the second subsection, means the capacity necessary to supply all firefighting equipment in the facility's largest fire area plus the largest of the adjacent areas. On simpler facilities without accommodation, the supply can come from a dedicated water reservoir, from seawater pumps or other available water supply. Source: Guidelines Regarding the Facilities Regulations, Norway, updated December 2012. Regulatory Guidance
Subsea Pipline

Subsea Pipline

Definition(s)


Subsea Pipeline

On a subsea facility, the subsea pipeline normally terminates at the connection to a christmas tree or wing valve. The christmas tree is not considered part of the pipeline system. On a subsea facility where the above definition cannot be applied, the subsea pipeline ends at the connection to the subsea facility. The connection piece is part of the subsea pipeline. Subsea pipelines and risers up to and including the chamber for launching or receiving tools for internal maintenance (including inspection), with associated equipment, are considered to belong to the pipeline system. If such a chamber has not been installed, the pipeline system is considered to extend to the first automatic shutdown valve above water. Source: Guidelines Regarding the Facilities Regulations, Norway, updated December 2012. Regulatory Guidance
Specific Assessments

Specific Assessments

Definition(s)


Specific Assessments

Specific assessments as mentioned in the second subsection, mean assessments of the overall risk for all activities related to operation and maintenance of the facilities, including transport of employees. Source: Guidelines Regarding the Facilities Regulations, Norway, updated December 2012. Regulatory Guidance
Safety Functions

Safety Functions

Definition(s)


Safety Functions

Safety functions include a) sectioning of the process, b) fire detection, c) gas detection, d) ignition source disconnection, e) maintaining overpressure in unclassified rooms, f) starting and stopping fire pumps, both manually and automatically, g) active fire-fighting h) active smoke control, i) process safety system, j) securing of wells, k) depressurisation, l) general alarm and evacuation alarm, m) production and distribution of emergency power, n) emergency lighting, o) emergency bilging, p) ballasting for floating facilities, q) maintenance of correct pressure, humidity, temperature and gas composition in diving facilities. Source: Guidelines Regarding the Facilities Regulations, Norway, updated December 2012. Regulatory Guidance  

Safety Functions

Physical measures that reduce the probability of a hazard and accident situation occurring, or that limit the consequences of an accident. Source: Regulations relating to design and outfitting of facilities, etc. in the petroleum activities (the Facilities Regulations), Norway, April 2010 (amended December 2012). Regulations Source: Regulations Relating to Technical and Operational Matters at Onshore Facilities in the Petroleum Activities, etc. (The Technical and Operational Regulations) Norway, April 2010 (amended December 2010). Regulations  

Safety Functions

Safety functions can be a) process sectionings b) fire detection, c) gas detection, d) ignition source disconnection, e) maintaining overpressure in unclassified rooms, f) starting and stopping fire pumps, both manually and automatically, g) active fire-fighting h) active smoke control, i) securing processes, j) depressurisation, k) general alarm and evacuation alarm, l) production and distribution of emergency power, m) emergency lighting. Source: Guidelines Regarding the Technical and Operational Regulations, Norway, updated December 2012. Regulatory Guidance
Realistic Conditions

Realistic Conditions

Definition(s)


Realistic Conditions

Realistic conditions as mentioned in the third subsection, means that variable parameters, such as weather, wind and current conditions and changes in the physical and chemical properties of the pollution over time should be selected so they are representative of the conditions that the material will operate under. Source: Guidelines Regarding the Facilities Regulations, Norway, updated December 2012. Regulatory Guidance
Open Drainage System

Open Drainage System

Definition(s)


Open Drainage System

Open drainage systems as mentioned in the first paragraph means systems that collect liquid, but are not pressurised. Source: Guidelines Regarding the Facilities Regulations, Norway, updated December 2012. Regulatory Guidance
Not Constituting a Danger to Other Facilities

Not Constituting a Danger to Other Facilities

Definition(s)


Not Constituting a Danger to Other Facilities

Not constituting a danger to other facilities as mentioned under simpler facilities without accommodation litera c, includes the meaning that fire on the facility does not jeopardise the safety of other facilities, e.g. through the possibility of the fire spreading or thermal stress. Source: Guidelines Regarding the Facilities Regulations, Norway, updated December 2012. Regulatory Guidance
New Type

New Type

Definition(s)


New Type

New type as mentioned in the third subsection, means a type that deviates materially from previous structural solutions, i.e. a prototype. Source: Guidelines Regarding the Facilities Regulations, Norway, updated December 2012. Regulatory Guidance